1 description pdm with ref16 and cable management system the power distribution module with printed circuit board is a com - pact power distribution system, designed as a rack made of profiled aluminium sheet for direct mounting, e.g. on the rear wall of a control cabinet. plug-in type thermal-magnetic circuit breakers type 2216 or electron - ic overcurrent protectors type ref16 (for dc 24 v) can be plugged into the terminal block system with a basic height of 2u. 30 single pole ways are available as a redundant or non-redundant system. the integral group signalling works as series connection of the make contacts. the entire internal circuitry is designed as a printed circuit board. the unprotected pole is also being patched in the distribution. connection is on the front via terminals directly on the pcb. status indication (green led) coupled with one relay output per group is available as an option. upon request it is also possible to add the junction of two redundant entry lines via decoupling diodes. a 1u patching unit with patching lugs manages the horizontal cable routing without additional cable ducts. order numbering code type no. pdm-p-l power distribution module with pcb, positive pole protected suitable types 2216 thermal-magnetic circuit breaker ref16 electronic overcurrent protector (dc 24 v only) supply and load terminals on pcb 30a0 1 x 30 types, non-redundant, 1 line entry 30a0 2 x 15 types, non-redundant, 2 line entries signalling, terminals on pcb b1 make contacts connected in series b7 make contacts connected in series, with voltage monitoring (dc 24 v only) options d decoupling diodes k cable management system fitted pdm-p-l-2216-30r0-b7 - d - k ordering example technical data power distribution module length: 84 hp (482 mm) height: 2u (88.90 mm) 3u (137 mm) with cable management depth: 110 mm material: aluminium, passivated rated voltage: ac 50 v; dc 50 v; dc 24 v with ref16 supply: screw terminals max. 50 a per group load terminals: 30 ways 1-pole protected (version a0) 2 x 15 ways 1-pole protected (version r0) spring-loaded terminals i max = 16 a (depending on circuit breaker rating, please observe derating factor) group signalling: make contacts connected in series (all versions) per group spring-loaded terminal, i max = 0.5 a voltage monitoring: optional signalling led green = voltage applied relay contacts (changeover) with spring-loaded terminals, i max = 0.5 a grounding of enclosure: via 2 terminal studs m6 ambient temperature range: 0 50 c benefits l reduced wiring time through printed circuit board design l compact dimensions of 482 (19") x 89 (2u) x 110 mm for applications where space is at a premium l 30 slots for thermal-magnetic or electronic overcurrent protectors in a power distribution module l redundant design optional with 2 x 15 ways l circuit breakers can be plugged in later (also with the system live) l spring-loaded terminals directly on the pcb (positive and negative pole) l line entry for cables up to 25 mm2 l line entry up to 2 x 50 a (redundant) l load terminals for cables up to 2.5 mm2 l load terminals up to 16 a (10 a with electronic protection) l group signalling through integral potential-free auxiliary contacts, make contacts connected in series l signalling available separately per group in the event of redundancy l voltage monitoring with relay contacts optional l optional cable patching below the module l protection against brush contact of all live parts l interchangeable flanges for assembly in 19" racks or on mounting plate in the control cabinet l customer-specific versions, e.g. with back-up fuses, de-coupling diodes, separate circuits, ac and/or dc, customised marking etc., are available upon request. www.e-t-a.de power distribution module (pdm) for 2216/ref16 1646 6
2 ina+ e+ e- e2 k1 k2 ina- sia 1+ 1- 2+ 2- 3+ 3- 15+ 15- 1+ 1- 2+ 2- 3+ 3- 15+ 15- no c nc no c nc sia mon. ua mon. ub load b max. 16 a option: voltage monitoring max. dc 30 v, max. 0.5 a load terminals, aux. contacts and relay contacts: spring-loaded terminals up to 2.5 mm 2 supply screw terminals 25 mm 2 , max. 50 a load a max. 16 a inb+ inb- sib sib 11 41 21 14 12 11 41 21 14 12 11 41 21 14 12 11 41 21 14 12 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 schematic diagram for version with 2216 versions and terminal designs version for supply terminals load terminals signalling/ voltage monitoring terminals on cable size tightening torque cable size tightening torque cable size tightening torque circuit breaker type 2216 pdm-p-l-2216-30a0-b1 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force pdm-p-l-2216-30r0-b1 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force pdm-p-l-2216-30a0-b7 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force pdm-p-l-2216-30r0-b7 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force overcurrent protector type ref16 pdm-p-l-ref16-30a0-b1 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force pdm-p-l-ref16-30r0-b1 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force pdm-p-l-ref16-30a0-b7 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force pdm-p-l-ref16-30r0-b7 (-k) printed circuit board 25 mm 2 4.0 C 4.5 nm 2.5 mm 2 spring force 2.5 mm 2 spring force ground studs m6 3.7 - 4.3 nm www.e-t-a.de power distribution module (pdm) for 2216/ref16 1646 6
3 a+ e+ e- e2 k1 k2 a- sia 1+ 1- 2+ 2- 3+ 3- 15+ 15- 1+ 1- 2+ 2- 3+ 3- 15+ 15- no c nc no c nc sia mon. ua mon. ub load b max. 10 a option: voltage monitoring max. dc 30 v, max. 0.5 a load terminals, aux. contacts and relay contacts: spring-loaded terminals up to 2.5 mm 2 supply screw terminals 25 mm 2 , max. 50 a load a max. 10 a b+ b- sib sib line (+) 1 2 load (x) ref16 ref16 ref16 ref16 ref16 ref16 ref16 ref16 14 si 2 load (x) 14 si 2 load (x) 14 si 2 load (x) 14 si 2 load (x) 14 si 2 load (x) 14 si 2 load (x) 14 si 2 load (x) 14 si gnd 12 si 11 line (+) 1 gnd 12 si 11 line (+) 1 gnd 12 si 11 line (+) 1 gnd 12 si 11 line (+) 1 gnd 12 si 11 line (+) 1 gnd 12 si 11 line (+) 1 gnd 12 si 11 line (+) 1 gnd 12 si 11 schematic diagram for version with ref16 www.e-t-a.de power distribution module (pdm) for 2216/ref16 1646 6 power distribution module (pdm) for 2216/ref16
4 top view 431,5 fitted with ref16 482,6 436 133 465,1 top view: side view: connections: interchangeable flange for 19?? mounting cable clamp rail (optional ) supply av oltage monitoring (optional) load terminals aa ux. contacts ag round stud fitted with 2216 109,5 dimensions www.e-t-a.de power distribution module (pdm) for 2216/ref16 1646 6
5 all dimensions without tolerances are for reference only. e-t-a reserves the right change specifications at any time in the interest of improved design, performance and cost effective - ness, the right to make changes in these specifications without notice is reserved. product markings may not be exactly as the ordering codes. errors and omissions excepted. 12,1 6 8,8 52 45 g e r m a n y max. 1a made in germany xxxx signal jumper 11(a)-14(c) sb-s21-p1-01-2-1a 11(a) 14(c) 11 (a) 14 (c) load max. 1 a auxiliary cir cuit (si) accessories schematic diagram jumper: for insertion in empty slots instead of circuit breakers for bridging the looped-through auxiliary contacts (series connection) sb-s21-p1-01-2-1a www.e-t-a.de power distribution module (pdm) for 2216/ref16 1646 6 power distribution module (pdm) for 2216/ref16
|
